If you witness a blue tint on your Hisense TV, it’s important to address it. Most LCD TVs naturally have a cooler color temperature in their LED backlights, which can be noticeable in white images but less so in other colors. However, if your Hisense TV screen appears unusually blue, this is a sign of a problem that needs fixing. Common causes include incorrect picture or input settings, faulty cables, or issues with the backlight.
Fortunately, you can often fix this color issue by adjusting the picture settings on your TV. If that doesn’t work, this guide offers additional troubleshooting steps to help you fix the blue tint on your Hisense TV.
Reasons for Hisense Smart TV Blue Tint Issue – An Outline
Here are the potential reasons why your Hisense Smart TV might have a blue tint:
- Wrong Picture Settings
- Damaged Cables
- Incorrect Video Source
- Power Fluctuation
- Outdated Software
- Bugs and Glitches
- Defective Backlight
Primary Solution to Fix Blue Tint on Hisense Smart TV Screen
The primary reason for the blue tint on your Hisense Smart TV is likely incorrect picture settings. To resolve this, you can try adjusting the picture settings on your TV. However, with so many options available, it might be a bit overwhelming. Therefore, it’s a good idea to reset the picture settings to their default state, which will undo any incorrect adjustments.
Before resetting, make sure to save or note down your current picture settings so that you can easily restore your preferred configuration afterward. You can quickly reset the picture settings by going to the Picture Mode section on your TV.
If resetting to default doesn’t fix the issue, go back to the Picture Mode Settings and change the Colour Temperature to Warm. This adjustment should help eliminate the blue tint on your Hisense TV screen.
Secondary Solutions to Solve Blue Tint on Hisense Smart TV
If the initial solution doesn’t work, try these common troubleshooting methods to fix the issue. These steps can help resolve not just a blue tint, but also purple, green, or other screen color problems on your Hisense Smart TV.
1. Check the Cable Connections
Start by examining the HDMI cables connected to your TV. Damaged cables can cause color issues, including a blue tint. If you notice any damage, replace the cable with a new one by purchasing it from Amazon. Also, try plugging the HDMI cable into a different HDMI port on your TV to see if that solves the problem.
2. Check the Power Supply
A blue screen without a picture can sometimes be caused by an unstable power supply. Power fluctuations may prevent your TV from receiving the proper amount of power, which can occasionally result in blue, green, or purple tints.
Make sure the power cable is securely connected to the power outlet. If needed, try connecting your TV to a different outlet.
3. Inspect the Input Source
The input source plays a key role in your TV’s picture quality. Issues with the input signal or the connected device, such as a streaming box, HDMI cable, Cable TV box, or gaming console, can lead to color problems.
Try switching the input on your Hisense Smart TV, and check the external devices connected to it. Disconnect any devices like streaming boxes or gaming consoles, and see if the blue tint disappears. If it does, the issue is likely with the external device.
If these steps don’t resolve the issue, you can move on to the next troubleshooting method.
Turn On the Blue Light Filter on Hisense TV
Adjusting the blue light filter can help reduce blue light emissions and improve your viewing experience. This might help you fix the blue tint on your Hisense Smart TV. Follow the steps below based on your TV model.
Hisense VIDAA TV
- Go to Settings → Picture → Picture Mode Settings → Expert Settings → Low Blue Light → Turn On.
Hisense Google TV
- Open Settings → Display & Sound → Picture → Advances Settings → Color → Blue Light Filter → Turn On the toggle.
Hisense Android TV
- Navigate to Settings → Device Preferences → Accessibility → Twilight → Turn On.
Hisense Roku TV
- Adjust the Color temperature to reduce the blue light on your TV.
Restart Hisense Smart TV
A quick restart often resolves most issues on a Hisense TV, including a blue tint on the screen. You can manually power cycle your Hisense TV by following these steps:
1. Switch off your Hisense TV and disconnect the power cord from the wall outlet.
2. Hold down the Power button on the TV panel for at least 10 seconds to release any residual power.
3. Allow the TV to remain off for 3-5 minutes.
4. Reconnect the power cord to the wall outlet and power on the TV.
Update your Hisense TV
Outdated firmware on your Hisense TV could be missing crucial features needed to fix screen issues like a blue tint. To resolve this, just update your Hisense Smart TV to the latest version. Once the update is complete, check to see if the blue tint on the screen has been resolved.
Factory Reset Hisense TV
If the troubleshooting methods mentioned above don’t resolve the issue, try resetting your Hisense TV to its default settings. This process can fix any incorrect settings and potentially resolve the blue screen issue. Turn on Hisense TV and press the Reset button. Hold the button until the TV restarts, then release it. Your Hisense TV will return to its original factory settings.
Replace Your Hisense TV Backlights
- If the blue tint on your Hisense TV screen remains after a reset, the problem could be in the TV’s LED backlight.
- To address this, review your Hisense TV’s warranty and either visit a local service center or reach out to the support team to have the backlight replaced for free.
Contact Hisense Customer Support
If you prefer not to replace any hardware parts on your own, reach out to Hisense TV customer service and request assistance from a professional technician. A technician can visit your home to check the TV. You can contact Hisense TV customer service through the following methods.
| Phone Number | 1-888-935-8880 |
| Contact Form | https://www.hisense-usa.com/contact |
| Global Customer Center | https://global.hisense.com/support/customer-center/ |
FAQ
To resolve this issue, try performing a factory reset on your Hisense Smart TV.