Are you encountering the issue of your Hisense Smart TV blinking on and off? This is often a minor problem, typically caused by an unstable or improper power supply. Additionally, issues with the TV’s hardware or software can also trigger this blinking problem. Fortunately, this can usually be resolved by ensuring a stable power supply or performing a reset on the device.
Before attempting a hard reset, it’s recommended to try some basic troubleshooting steps. This guide provides easy DIY solutions to help you fix the blinking issue on your Hisense Smart TV.
Reasons & Fixes for Hisense Smart TV Blinking On and Off – An Outline
If your Hisense TV is repeatedly turning off or blinking on and off, the following reasons and solutions may apply:
1. Improper Power Supply
- Securely connect the power cable to the power socket.
- Try plugging your TV into a different power socket.
2. Software Glitches
- Restart your Hisense TV.
- Update the TV’s firmware.
- Perform a reset on your Hisense TV.
3. Hardware Issues
- Inspect for any hardware damage.
- Replace any faulty hardware components.
7 Best Solutions to Fix Hisense TV Blinking On and Off Issue
If your Hisense TV is blinking on and off, try the following solutions:
Check the Power Supply
- A common cause of your Hisense TV flashing on and off is an unstable power supply. Make sure your home has a stable and adequate power supply.
- A damaged power cord or faulty power socket can also cause your Hisense TV to blink. To address this, replace any damaged cables or connect the TV to a different power socket. Then, turn on your TV to see if the issue is resolved.
- If an external device is not securely connected, it can cause the Hisense TV to flicker. Ensure the HDMI cable is firmly connected to the TV.
Restart Hisense TV
- Occasionally, firmware bugs or glitches can cause the Hisense TV to blink. Restarting your TV can help eliminate these issues.
- Restarting your Hisense TV clears bugs, refreshes the memory for improved performance, and clears the TV’s cache. If restarting doesn’t fix the problem, proceed with other solutions to resolve the issue.
Update Hisense Smart TV
- Outdated software on your Hisense TV can cause various issues and malfunctions. If you haven’t updated your Hisense TV in a while, it’s essential to install the latest version to resolve any problems.
- After updating the TV’s firmware, turn off the Hisense TV, then turn it back on. Check to see if the blinking issue has been resolved.
Reset Hisense TV Remote
- Though it might seem unlikely, a blocked or jammed power button on the remote can cause it to send signals to turn the TV on and off continuously. To address this, unplug the TV from the wall outlet, then carefully use a pin or SIM ejector tool to unjam the power button on the remote.
- If the issue persists, consider resetting your Hisense TV remote.
Turn Off Energy Saver on Hisense TV
- The Energy Saver feature on Hisense TVs is designed to reduce power consumption by turning off the TV when it’s idle. However, this feature can sometimes malfunction, causing the TV to turn on and off automatically.
- To resolve this, go to the TV settings and disable the Energy Saver feature, then check if the problem continues.
Factory Reset Your Hisense TV
- Over time, your Hisense TV may accumulate errors and bugs that can corrupt the software, leading to issues like the TV blinking on and off. A factory reset is often the most effective solution to fix this problem and restore the TV’s software to its original state.
- If the TV’s blinking makes it difficult to access the settings menu, you can perform a factory reset manually. Locate the Reset button on the back of your Hisense TV and press it with a pin. Hold the button until the Hisense logo appears on the screen.
Contact Hisense Customer Support
If the blinking issue persists even after a factory reset, it’s advisable to reach out to Hisense’s customer support for expert assistance.
- Contact Us Form: https://global.hisense.com/support/contact-us/
- Customer Center: https://global.hisense.com/support/customer-center/
- Phone Number: +1 (888) 935-8880
If the problem stems from an internal hardware component, you may be able to claim the warranty for a free repair.
FAQ
Start by checking the TV’s power supply and disabling the energy saver mode. If the issue persists, turn off the TV for an hour and then try again.
A red flashing light on your Hisense TV could indicate the TV is stuck in standby mode, or it may be caused by faulty wires, power supply issues, or software/hardware malfunctions.